TM 9-2320-366-34-2
Change 2
9-21
(9.1) Tighten four screws (11) to 26-36 lb-ft (35-47 N•m)
(9.2)Fold tabs on four screws (11).
(10) Apply lubrication to grease fittings (TM 9-2320-366-
20).
c. Follow-On Maintenance.
(1)
Check differential oil level (TM 9-2320-366-20).
(2)
Lubricate drive shaft universal joint and slip yoke (TM 9-
2320-366-20-1).
(3)
Operate vehicle and check differential for proper
operation (TM 9-2320-366-10-1).
(4)
Shut down engine (TM 9-2320-366-10-1).
(5)
Check pinion seal for oil leaks.
End of Task.
CAUTION
Grease must flow from all four seals.
Failure
to comply may result in damage to
equipment.
NOTE
Perform steps (9.1) and (9.2) on bearing cups
equipped with tabs.