TM 9-2320-366-34-2
9-18
Change 2
9-4.
FRONT AXLE DIFFERENTIAL CARRIER REPLACEMENT (CONT)
(8.1) Tighten four screws (12) to 26-35 lb-ft (35-47 N
•
M).
(8.2) Fold tabs on four screws (12).
(9)
Apply lubrication to grease fittings (TM 9-2320-366-
20).
c. Follow-On Maintenance.
(1)
Install front axle shaft (para 9-3).
(1.1)Lubricate drive shaft universal joint and slip yoke
(TM 9-2320-366-20-1).
(2)
Refill front axle differential carrier oil (TM 9-2320-366-20).
(3)
Install tie-rod assembly (TM 9-2320-366-20-4).
(4)
Start engine (TM 9-2320-366-10).
(5)
Operate vehicle and check for proper operation of front
axle differential carrier (TM 9-2320-366-10-1).
(6)
Shut down engine (TM 9-2320-366-10).
(7)
Check front axle differential carrier for oil leaks.
End of Task.
CAUTION
Grease must flow from all four seals.
Failure to comply may result in damage
to equipment.
NOTE
Perform the following two steps on bearing
cups equipped with tabs.