TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 681 of 1434

TM 9-2320-366-34-2

d. M1093 Installation.

NOTE

• Left and right side of rear tension beam is

installed the same way. Left side shown.

• Steps (1) through (7) require the aid of an

assistant.

(1) Position rear tension beam (1) and taillight mounting

bracket (2) on vehicle with three bolts (3) and self-

locking nuts (4).

(2) Tighten three self-locking nuts (4) to 210-225 lb-ft (285-

305 N·m).

(3) Position rear spreader bar bracket (5) on rear tension

beam (1) with two bolts (6) and self-locking nuts (7).

(4) Tighten two self-locking nuts (7) to 210-225 lb-ft (285-

305 N·m).

(5) Position bolt (8) and self-locking nut (9) in rear tension

beam (1).

(6) Tighten self-locking nut (9) to 210-225 lb-ft (285-305

N·m).

(7) Install shackle (10) on rear tension beam (1) with pin

(11).

(8) Perform steps (1) through (7) on right side of rear

tension beam.

13-23