TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 684 of 1434

TM 9-2320-366-34-2

13-6. REAR TENSION BEAM AND TAILLIGHT MOUNTING BRACKET REPLACEMENT

(CONT)

h.

M1085 Installation.

NOTE

• Left and right side of rear tension beam is

installed the same way. Left side shown.

• Steps (1) through (5) require the aid of an

assistant.

(1) Position rear tension beam (1) and taillight mounting

bracket (2) on vehicle with four bolts (3) and self-locking

nuts (4).

(2) Tighten four self-locking nuts (4) to 210-225 lb-ft (285-

305 N·m).

(3) Position two bolts (5) and self-locking nuts (6) in rear

tension beam (1).

(4) Tighten two self-locking nuts (6) to 210-225 lb-ft (285-

305 N·m).

(5) Install shackle (7) on rear tension beam (1) with pin (8).

(6) Perform steps (1) through (5) on right side of rear

tension beam.

13-26