TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 692 of 1434

TM 9-2320-366-34-2

13-7. REAR CROSSMEMBER REPLACEMENT (CONT)

(6) Remove five self-locking nuts (11) and bolts (12) from

rear crossmember (5). Discard self-locking nuts.

(7) Perform steps (5) and (6) on right side of rear

crossmember.

(8) Remove rear crossmember (5) from vehicle.

b. M1084/M1086 Installation.

NOTE

• Left and right side of rear crossmember is

installed the same way. Left side shown.

• Steps (1) through (4) require the aid of an

assistant.

(1) Position rear crossmember (1) on vehicle with five bolts

(2) and self-locking nuts (3).

(2) Tighten five self-locking nuts (3) to 210-225 lb-ft (285-

305 N·m).

(3) Position two bolts (4) and self-locking nuts (5) in rear

crossmember (1).

(4) Tighten two self-locking nuts (5) to 210-225 lb-ft (285-

305 N·m).

(5) Perform steps (1) through (4) on right side of rear

crossmember.

13-34