TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 698 of 1434

TM 9-2320-366-34-2

13-7. REAR CROSSMEMBER REPLACEMENT (CONT)

CAUTION

When removing bolts, continuous removal of

collars is mandatory. Failure to comply will

result in seizing of collar to bolt.

(9) Remove three collars (20) and bolts (21) from rear

crossmember (5). Discard collars and bolts.

(10) Remove two self-locking nuts (22) and bolts (23) from

rear crossmember (5). Discard self-locking nuts.

(11) Perform steps (5) through (10) on right side of rear

crossmember.

(12) Remove

two

collars

(24),

bolts

(25)

and

rear

crossmember (5) from vehicle. Discard collars and bolts.

f. M1083/M1093 Installation.

NOTE

Steps (1) through (6) require the aid of an

assistant.

(1) Position rear crossmember (1) on vehicle with two bolts

(2) and self-locking nuts (3).

(2) Tighten two self-locking nuts (3) to 210-225 lb-ft (285-

305 N·m).

13-40