TM 9-2320-366-34-2
d. M1088 Installation.
NOTE
• Left and right side of rear crossmember is
installed the same way. Left side shown.
• Steps (1) through (5) require the aid of an
assistant.
(1) Position rear crossmember (1) on vehicle with five bolts
(2) and self-locking nuts (3).
(2) Tighten five self-locking nuts (3) to 210-225 lb-ft (285-
305 N·m).
(3) Position bolt (4) and self-locking nut (5) in rear
crossmember (1).
(4) Tighten self-locking nut (5) to 210-225 lb-ft (285-305
N·m).
(5) Perform steps (1) through (4) on right side of rear
crossmember.
13-37