TM-9-2320-366-34-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-2 - Page 738 of 1434

TM 9-2320-366-34-2

13-12. M1094 EXTRACTION TUBE AND EXTENSION BRACKET REPLACEMENT (CONT)

(8) Remove eight nuts (22), lockwashers (23), bolts (24),

washers (25), and extraction block (16) from extraction

tube (4). Discard lockwashers.

b. Installation.

NOTE

Left and right side extraction tubes are

installed the same way. Left side shown.

(1) Position extraction tube (1) in vise.

(2) Position extraction block (2) in extraction tube (1) with

eight washers (3), bolts (4), lockwashers (5) and nuts

(6).

(3) Tighten eight nuts (6) to 210-225 lb-ft (285-305 N·m).

(4) Position mounting plate (7) on extraction tube (1) with

two washers (8), bolts (9), lockwashers (10), and nuts

(11).

(5) Tighten two nuts (11) to 33-45 lb-ft (45-61 N·m).

(6) Install washer (12) and tie-down ring (13) in extraction

block (2).

(7) Remove extraction tube (1) from vise.

13-80