TM-9-2320-366-34-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 3 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-3 - Page 216 of 1178

TM 9-2320-366-34-3

15-136.2

Change 2

15-9.

CARGO BED REPLACEMENT/REPAIR (CONT)

(2)

Remove nut (7), spacer (8), teflon washer (9), D-

ring (10), and D-ring (11) from cast tie down cup

(12).

j. Tie Down Installation

(1) Position D-ring (1) in D-ring retainer (2).

(2) Position teflon washer (3) on D-ring retainer (2).

(3) Position D-ring retainer (2) in stamped tie down cup

(4).

(4) Position washer (5) and nut (6) on D-ring retainer (2).

(5) Tighten nut (6) to 76-94 lb-ft (103-128 N•m).

NOTE

Perform step (2) on tie down with cast cups.

NOTE

•

There are two types of tie down cups

installed on cargo beds.

On the underside,

stamped cups have raised center sections

and cast cups have flat center sections.

•

Steps (1) through (10) require the aid of an

assistant.

•

Perform steps (1) through (5) on tie downs

with stamped cups.