TM 9-2320-366-34-3
Change 2
15-147
15-12.
M1089 TOOL BOX SUPPORT STRUCTURE REPLACEMENT
This task covers:
a. Removal
b. Installation
c.
Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Rear side marker lights removed (TM 9-2320-366-20-
3).
Back-up lights removed (TM 9-2320-
366-20-3).
Stoplights and brackets removed (TM 9-2320-366-
20-3).
Worklights removed (TM 9-2320-366-20-3).
Tool boxes and decks removed (TM 9-2320-366-20-
4).
Tools and Special Tools
Tool Kit, Genl Mech (Item 78, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B)
Pan, Drain (Item 43, Appendix B)
Sling, Cargo (Item 56, Appendix B)
Wrench Set, Crow Foot Patch Inc-(TM-9-2320-366-
20) (Appendix B, item 87)
Tools and Special Tools (Cont)
Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)
Wrench Set, Socket (Item 84, Appendix B)
Materials/Parts
Cap and Plug Set (Item 17, Appendix C)
Dispenser, Pressure Sensitive Adhesive Tape (Item
30, Appendix C)
Lubricating Oil, Engine (Item 46, Appendix C)
Tape, Anti-seizing (Item 84, Appendix C)
Ties, Cable Plastic (Item 92, Appendix C)
Nut, Self-Locking (6) (Item 211, Appendix F)
Nut, Self-Locking (6) (Item 180, Appendix F)
Washer, Lock (6) (Item 142, Appendix F)
Nut, Self-locking (2) (Item 196, Appendix F)
Rope, Fibrous (2) (25 ft long) (Item 62, Appendix C)
Personnel Required
(3)
a. Removal.
(1)
Remove two plugs (1) from adapters (2).
(2)
Remove nut (3), screw (4), lanyard (5) and two
plugs (1) from support structure (6).
CAUTION
Cap or plug hydraulic hoses to prevent
contamination of hydraulic system.
Failure
to comply may result in damage to
equipment.
NOTE
•
Tag hoses, cables, and connection points
prior to disconnecting.
•
Perform steps (1) through (5) on left side
of support structure.