TM-9-2320-366-34-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 3 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-3 - Page 608 of 1178

TM 9-2320-366-34-3

16-63. 30K WINCH ASSEMBLY REPLACEMENT/REPAIR (CONT)

NOTE

• Left and right side lamp brackets are installed

the same way. Left side shown.

• Refer to

Table 16-2. Clearance Marker Light

Connector

for combinations of terminal lugs

and connectors on each marker light.

(19) Route harness (26) through 30K winch assembly (2).

(20) Install lamp bracket (27) on 30K winch assembly (2) with

three screws (28) and self-locking nuts (29).

(21) Connect harness connector (30) to electrical connector

489 (31).

(22) Install terminal lug (32) on marker light (33) with washer

(34) and nut (35).

(23) Perform steps (21) and (22) on right side lamp bracket.

Table 16-2. Clearance Marker Light Connectors

Marker Light Location

Connector

Terminal Lug

Left Side

P94

TL88

Right Side

P95

TL89

(24) Position monoblock valve (36) on 30K winch assembly

(2) with mounting plate (37), two screws (38), and self-

locking nuts (39).

(25) Position three screws (40) and self-locking nuts (41) in

mounting plate (37).

(26) Tighten three self-locking nuts (39 and 41) to 76-84 lb-ft

(103-114 N·m).

16-372