TM-9-2320-366-34-3
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 3 OF 4
AUGUST 2005
CHANGE 2
TM-9-2320-366-34-3 - Page 601 of 1178
TM 9-2320-366-34-3
(26) Install cylinder (32) on piston (29).
(27) Install coupling (33) in piston (29).
WARNING
Use care when installing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to
comply
may
result
in
injury
to
personnel.
(28) Install retaining ring (34) in coupling (33).
(29) Install coupling (33) in gear end cover (22).
NOTE
Step (30) requires the aid of an assistant.
(30) Push down and hold coupling (33) and cylinder (32) in
gear end cover (22).
(31) Install retaining ring (35) in gear end cover (22).
(32) Release coupling (33) and cylinder (32).
(33) Position gear end cover (22) on ring gear (12) with
matchmarks aligned.
CAUTION
Gear end cover is under pressure. Position
screws evenly in gear end cover. Failure to
comply may result in damage to equipment.
(34) Position 12 lockwashers (36) and screws (37) in gear
end cover (22).
(35) Tighten 12 screws (37) to 38-45 lb-ft (52-61 N·m) in
sequence shown.
(36) Position ring gear (12) on gear end support (5) with
matchmarks aligned.
16-365
Back to Top
