TM-9-2320-366-34-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 3 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-3 - Page 707 of 1178

TM 9-22320-366-34-3

Change 2

16-481

16-79.

M1089 FLOWMETER VALVE ASSEMBLY REPLACEMENT/ADJUSTMENT

This task covers

a. Removal

b. Installation

c. Adjustment

d.

Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Underlift lowered (TM 9-2320-366-10-2).

Batteries disconnected (TM 9-2320-366-20-3).

Hydraulic reservoir supply and return valve closed (TM

9-2320-366-10-2).

Tools/Special Tools

Tool Kit, Genl Mech (Item 78, Appendix B)

Goggles, Industrial (Item 28, Appendix B)

Tools/Special Tools (Cont)

Sling, Cargo (Item 56, Appendix B)

Materials/Parts

Nut, Self-Locking (8) (Item 211, Appendix F)

Packing, Preformed (2) (Item 237, Appendix F)

Personnel Required

(2)

a.

Removal.

(1)

Remove nut (1) and bracket (2) from tool box (3).

(2)

Remove nut (4) and towbar (5) from tool box (3).

WARNING

NOTE

•

This procedure applies to both the upper

and lower flowmeter valve assemblies. The

upper flowmeter valve assembly is shown.

•

The upper flowmeter valve assembly must

be removed first.

Towbar weighs approximately 150 lbs

(68 kgs).

Attach a suitable lifting device

prior to removal.

Failure to comply may

result in injury to personnel or damage

to equipment.

NOTE

Steps (2) requires the aid of two assistants.