TM-9-2320-366-34-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 4 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-4 - Page 106 of 796

TM 9-2320-366-34-4

18-5. M1085 PINTLE HOOK EXTENSION KIT INITIAL INSTALLATION (CONT)

a. Installation.

(1) Remove cotter pin (1) from nut (2). Discard cotter pin.

(2) Remove nut (2) and washer (3) from pintle hook (4).

WARNING

Pintle hook weighs approximately 65 lbs

(30 kgs). Attach a suitable lifting device

prior to removal. Failure to comply may

result in injury to personnel or damage to

equipment.

(3) Remove pintle hook (4) from rear crossmember (5).

(4) Remove four self-locking nuts (6), bolts (7), and support

(8) from rear crossmember (5).

Discard self-locking

nuts.

NOTE

• Left and right clamps are removed the same

way. Right side shown.

• Remove plastic cable ties as required.

(5) Remove self-locking nut (9), screw (10), and clamp (11)

from L-bracket (12).

18-52

Change 1