TM-9-2320-366-34-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 4 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-4 - Page 99 of 796

TM 9-2320-366-34-4

NOTE

• Use bolts P/N 12414307-142 and self-locking

nuts P/N 12414308-025 on step (53).

• Support will be installed with fitting facing down.

(53) Position support (12) on pintle hook extension (57) with

four bolts (11) and self-locking nuts (10).

(54) Position pintle hook extension (57) in vise.

(55) Tighten four self-locking nuts (10) to 196-240 lb-ft (265-

325 N·m).

(56) Position pintle hook (8) in pintle hook extension (57) with

washer (7) and nut (6).

CAUTION

Clearance between washer and support must

be 0.003-0.017 in. (0.076-0.432 mm). Failure

to

comply

may

result

in

damage

to

equipment.

(57) Adjust nut (6) until clearance is 0.003-0.017 in. (0.076-

0.432 mm) with alignment holes lined up between nut (6)

and pintle hook (8).

(58) Install cotter pin (5) in nut (6).

Change 1

18-45