TM 9-2320-366-34-4
24-18
Change 2
24-2.
INTERMEDIATE DIFFERENTIAL REPAIR (CONT)
(53.1) Apply a small amount of sealing compound to
outside edge and spring cavity of oil seal (52).
(54)
Install oil seal (52) on differential carrier (14).
(55)
Install yoke seal (53) in output yoke (54).
(56)
Apply adhesive sealant to threads of self-locking
nut (55).
(57)
Position output yoke (54) on inter-axle slide gear (49)
with self-locking nut (55).
(58) Position inter-axle nest assembly (56) in differential
carrier (14).
(59) Position helical drive gear (57) and thrust washer
(58) on differential carrier (14) with match marks
aligned to helical driven gear (59).
WARNING
Adhesives,
solvents,
and
sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing.
Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water.
Failure
to comply may result in injury to
personnel.