TM-9-2320-366-34-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 4 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-4 - Page 378 of 796

TM 9-2320-366-34-4

24-20

Change 2

24-2.

INTERMEDIATE DIFFERENTIAL REPAIR (CONT)

(71) Apply adhesive sealant to mounting flange of

differential carrier (14) and threads of oil screen

(65).

(72) Position oil pump cover (66) on differential carrier

(14)

with nine washers (67) and screws (68).

(73) Tighten screws (68) to 74-96 lb-ft (100-130 N•m).

(74) Install oil screen (65) on oil pump cover (66).

d. Adjustment

A. Ring Gear Runout:

(1)

Attach dial indicator on mounting flange of

differential carrier (1).

(2)

Adjust dial indicator so plunger is against the back

surface of ring gear (2).

(3)

Adjust dial indicator to zero.

(4)

Rotate ring gear (2) a complete rotation.

Dial

indicator should not exceed 0.008 in. (0.020 cm)

runout.

WARNING

NOTE

Ensure pin inside oil pump cover fits in notch

of pump. Failure to comply may result in

damage to equipment.

Adhesives,

solvents,

and

sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing.

Keep away from open fire

and use in a well-ventilated area.

If

adhesive, solvent, or sealing compound

gets

on

skin

or

clothing,

wash

immediately with soap and water.

Failure

to comply may result in injury to

personnel.