TM-9-2320-366-34-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 4 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-4 - Page 451 of 796

TM 9-2320-366-34-4

(5) Position motor housing (2) in vise with output shaft (1)

up.

WARNING

Adhesive Sealant MIL-S-46163 can damage

your eyes. Wear safety goggles when using;

avoid contact with eyes. If sealant contacts

eyes,

flush

eyes

with

water

and

get

immediate medical attention.

Failure to

comply may result in injury to personnel.

(6) Apply sealing compound to four screws (10).

(7) Position motor housing flange (8) on output shaft (1) with

four screws (10).

CAUTION

Tighten screws in a crisscross pattern to

properly seat mounting flange.

Failure to

comply may result in damage to equipment.

(8) Tighten screws (10) to 21 lb-ft (28 N·m).

(9) Reposition motor housing (2) in vise with output shaft (1)

down.

CAUTION

Mark bolt hole on motor housing that aligns

with timing mark on output shaft. Failure to

comply may result in damage to equipment.

(10) Align timing mark on output shaft (1) with any bolt hole

in motor housing (2).

(11) Install preformed packing (11) on motor housing (2).

(12) Install spur gear shaft (12) in output shaft (1).

(13) Fill motor housing (2) with lubricating oil.

(14) Install spacer plate (13) on motor housing (2).

26-17