TM 9-2320-366-34-4
(3) Install retainer (5), seal (6), and preformed packing (7) in
motor housing flange (8).
(4) Install gasket (9) in motor housing flange (8).
(5) Position motor housing (2) in vise with output shaft (1)
up.
WARNING
Adhesive Sealant MIL-S-46163 can damage
your eyes. Wear safety goggles when using;
avoid contact with eyes. If sealant contacts
eyes,
flush
eyes
with
water
and
get
immediate medical attention.
Failure to
comply may result in injury to personnel.
(6) Apply sealing compound to four screws (10).
(7) Position motor housing flange (8) on output shaft (1) with
four screws (10).
CAUTION
Tighten screws in a crisscross pattern to
properly seat mounting flange.
Failure to
comply may result in damage to equipment.
(8) Tighten screws (10) to 21 lb-ft (28 N·m).
26-23