TM-9-2320-366-34-4
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 4 OF 4
AUGUST 2005
CHANGE 2
TM-9-2320-366-34-4 - Page 64 of 796
TM 9-2320-366-34-4
18-2. M1083 PINTLE HOOK EXTENSION KIT INITIAL INSTALLATION (CONT)
NOTE
• Position two spacers on frame rails with beveled
edges facing down.
• Use bolts P/N 12414307-149 and 12414307-148 on
step (42).
• Left and right side of rear main crossmember
support is installed the same way. Right side
shown.
• Route connectors and terminal lugs under rear
main crossmember.
(42) Position two spacers (87) and rear main crossmember
support (88) on LH and RH frame rails (30 and 45) with
two bolts (89 and 90) and four self-locking nuts (91).
NOTE
Use bolts P/N 12414307-090 on step (43).
(43) Position two bolts (92) and self-locking nuts (93) on rear
main crossmember support (88).
NOTE
Use bolts P/N 12414307-079 on step (44).
(44) Position six bolts (94) and self-locking nuts (95) on rear
lower crossmember support (84).
(45) Remove 45-degree grease fitting (96) from support (19).
(46) Install grease fitting (97) in support (19).
18-10
Change 1
Back to Top
