TM-9-2320-366-34-4
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 4 OF 4
AUGUST 2005
CHANGE 2
TM-9-2320-366-34-4 - Page 65 of 796
TM 9-2320-366-34-4
NOTE
• Use bolts P/N 12414307-142 on step (47).
• Support will be installed with grease fitting facing down.
(47) Position support (19) on pintle hook extension (80) with
four bolts (18) and self-locking nuts (17).
(48) Position pintle hook extension (80) in vise.
(49) Tighten four self-locking nuts (17) to 196-240 lb-ft (265-
325 N·m).
(50) Position pintle hook (15) in pintle hook extension (80)
with washer (14) and nut (13).
CAUTION
Clearance between washer and support must be
0.003-0.017 in. (0.076-0.432 mm). Failure to comply
may result in damage to equipment.
(51) Adjust nut (13) until clearance is 0.003-0.017 in. (0.076-
0.432 mm) with alignment holes lined up between nut
(13) and pintle hook (15).
(52) Install cotter pin (12) in nut (13).
Change 1
18-11
Back to Top
