TM-9-2320-386-10
2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); OPERATOR’S MANUAL
JANUARY 1996
TM-9-2320-386-10 - Page 92 of 223
TM 9-2320-386-10
2-59
2-18. OPERATION OF FRONT WINCH (Contd)
.
WARNING
.
When hooking up for winching operations, position throat (open
part) of hook upward in case overloading straightens out hook.
Failure to do so may result in death or injury to personnel.
(2)
Fasten winch cable (11) to load (10) being pull.
NOTE
For an excessively heavy load, use a snatch block. To pull load
that is not in a direct line, use snatch block and utility chain.
(3)
To pull a load (12) that is not in direct line, use snatch block (14) and
utility chain (15) as shown. Ensure from drum lock knob (8) is disen-
gaged.
(4)
Move winch clutch control lever (3) to the IN position (toward passenger
side of vehicle).
(5)
Start engine (para. 2-12).
(6)
Place winch control valve lever (16) to the ENGAGE position.
(7)
Hold winch control switch (15) in PAY IN position.
3
10
5
11
8
12
11
14
13
1
15
15
2
Back to Top
