TM-9-2320-386-24-1-1
2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2
MAY 2001
TM-9-2320-386-24-1-1 - Page 11 of 1078
4.
Look down the list until you find ENGINE. Beneath that heading you will find the symptom noted by
the maintenance mechanic: Engine cranks but will not start.
5.
Turn to the work package and page indicated, WP 0010 00-2.
6.
In WP 0010 00-2, there are steps and text related to resolving the problem of engine cranks but will
not start.
Step 1. You follow the steps listed under engine cranks but will not start and determine that the fuel
filter needs replacing. WP 0054 00, Fuel Filter Maintenance, is referenced.
Step 2. The rest of the inspection shows no other cause for the problem.
7.
Detailed procedures include everything you must do to accomplish a basic maintenance task.
a.
Before beginning the maintenance task, look through the procedure. You must familiarize
yourself with the entire maintenance procedure before beginning the maintenance task.
The entire procedure for WP 0054 00, Fuel Filter Maintenance, includes draining, removal,
cleaning, inspection, and installation instructions.
b.
The seven basic headings under INITIAL SETUP outline the information required by the user
before starting the detailed procedure. They are:
– Test Equipment: Test equipment required to perform the procedure.
– Tools and Special Tools: Those tools needed to perform the maintenance task.
– Materials/Parts: All mandatory replacement parts and materials needed to perform the task.
– Personnel Required: The number of personnel required for a task if task requires more than one.
– References: Those manuals needed to complete the task.
– Equipment Condition: Notes the conditions that must exist before starting the task.
– Special Environmental Conditions: Any special environmental conditions that are required.
8.
Refer to WP 0054 00, Fuel Filter Maintenance, as you review the following points:
a.
Modular Text: Both text and illustrations are used together. This manual was designed so that
the two would be visible at once, making part identification and procedure sequence easy to follow.
b.
Initial Setup: Outlines task conditions.
c.
Illustrations: An exploded diagram of the component, removed from the vehicle, shows part
locations, attachments, and spatial relationships.
9.
Your manual is easier to use once you understand its design. We hope it will encourage you to use it
more often.
HOW TO USE THIS MANUAL (Contd)
vi
TM 9-2320-386-24-1-1
Back to Top
