TM-9-2320-386-24-1-1

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2

MAY 2001

TM-9-2320-386-24-1-1 - Page 383 of 1078

10

4

3

11

12

13

14

1

2

3

4

5

6

7

8

9

LOAD

PORT B

BATTERY

PORT D

LAMP

PORT C

GROUND

PORT A

0093 00-2

TM 9-2320-386-24-1-1

0093 00

STARTER SWITCH REPLACEMENT (Contd)

END OF WORK PACKAGE

REMOVAL

1.

Remove screw (9), lockwasher (10), and handle (8) from starter switch (4). Discard lockwasher (10).

2.

Remove nut (7), lockwasher (6), and switch plate (1) from starter switch (4). Discard lockwasher (6).

3.

Remove starter switch (4) from instrument panel (5).

NOTE

Tag all wires for installation.

4.

Disconnect wires 117 (11), 74A (12), 74 (13), and 118 (14) from starter switch (4).

INSTALLATION

1.

Connect ground wire 117 (11) to port A, load wire 74A (12) to port B, battery wire 74 (13) to port D,

and lamp wire 118 (14) to port C on starter switch (4).

2.

Align pin (3) with hole (2) and install starter switch (4) and switch plate (1) on instrument panel (5)

with new lockwasher (6) and nut (7).

3.

Install handle (8) on starter switch (4) with new lockwasher (10) and screw (9).

4.

Connect battery ground cable (WP 0121 00).

5.

Start engine (TM 9-2320-386-10).