TM-9-2320-386-24-1-1

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2

MAY 2001

  TM-9-2320-386-24-1-1 - Page 392 of 1078

0095 00-2
TM 9-2320-386-24-1-1
0095 00
TACHOMETER REPLACEMENT (Contd)
NOTE
Appropriate locking hardware is provisioned with gauge.
REMOVAL
1.
Turn four lockstuds (2) 1/4-turn to left and pull instrument mounting panel (3) away from
instrument panel (1).
2.
Disconnect cannon plug (5) from tachometer (4).
3.
Remove two nuts (9), lockwashers (8), ground (GND) lead (6), bracket (7), and tachometer (4) from
instrument mounting panel (3).
INSTALLATION
1.
Install tachometer (4), bracket (7), and ground (GND) lead (6) on instrument mounting panel (3)
with two lockwashers (8) and nuts (9).
2.
Connect cannon plug (5) to tachometer (4).
3.
Position instrument mounting panel (3) on instrument panel (1) and install by turning four
lockstuds (2) 1/4-turn to right.
4.
Connect battery ground cable (WP 0121 00).
5.
Start engine (TM 9-2320-386-10) and check tachometer for proper operation.


Back to Top