TM-9-2320-386-24-1-1
2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2
MAY 2001
TM-9-2320-386-24-1-1 - Page 416 of 1078
0104 00-2
TM 9-2320-386-24-1-1
0104 00
QUICK-START SWITCH REPLACEMENT (Contd)
END OF WORK PACKAGE
REMOVAL
1.
Remove two screws (4), cold-start data plate (3), and quick-start switch (7) from instrument
panel (5).
NOTE
Tag all wires for installation.
2.
Disconnect leads 569A (1) and 569 (8) from quick-start switch (7) and remove quick-start switch (7).
INSTALLATION
1.
Connect leads 569A (1) and 569 (8) to quick-start switch (7).
2.
Push switch lever (6) through hole (2) in instrument panel (5).
3.
Position cold-start data plate (3) on instrument panel (5).
4.
Install quick-start switch (7) and cold-start data plate (3) on instrument panel (5) with two
screws (4).
5.
Connect battery ground cable (WP 0121 00).
2
1
8
7
6
4
3
5
Back to Top
