TM-9-2320-386-24-1-1

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2

MAY 2001

TM-9-2320-386-24-1-1 - Page 421 of 1078

0106 00-2

TM 9-2320-386-24-1-1

0106 00

FRONT AND REAR COMPOSITE LIGHTS AND LAMPS REPLACEMENT (Contd)

1

2

4

5

6

7

3

9

8

10

12

11

NOTE

Left and right front composite lamps, rear composite lamps,

composite lights, rear composite lights, and composite light angle

brackets are replaced the same. These procedures cover the left

side.

Tag all wires for installation.

FRONT LAMP REMOVAL

1.

Remove five screws (1), lens cover (12), and O-ring (11) from composite light housing (4). Discard

O-ring (11).

NOTE

Perform step 2 for vehicles with lamp configuration. Perform

steps 3 through 5 for vehicles with lamp and semiconductor device

configuration.

2.

Remove lamps (2), (3), and (10) from sockets (5), (6), and (7).

3.

Remove lamps (2) and (3) from sockets (5) and (6).

4.

Position semiconductor device (9) for access to socket (7).

5.

Remove connector (8) from socket (7).