TM-9-2320-386-24-1-1
2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2
MAY 2001
TM-9-2320-386-24-1-1 - Page 429 of 1078
REAR LAMP INSTALLATION
NOTE
Steps 1, 5, and 6 are for vehicles with lamp configuration. Steps 2
through 6 are for vehicles with lamp and clearance marker light
and stoplight semiconductor device configuration.
1.
Install lamps (2), (3), and (6) in sockets (15), (14), (13), and (12).
2.
Install lamps (2) and (3) in sockets (15) and (14).
3.
Install connectors (4) and (8) in sockets (13) and (12).
4.
Position clearance marker light (5) on connector (4) and stoplight (7) on connector (8).
5.
Install new O-ring (11) and lens cover (9) on composite light housing (1) with six screws (10).
6.
Connect battery ground cable (WP 0121 00).
0106 00-10
TM 9-2320-386-24-1-1
0106 00
FRONT AND REAR COMPOSITE LIGHTS AND LAMPS REPLACEMENT (Contd)
END OF WORK PACKAGE
~
1
15
2
4
3
5
7
8
10
11
9
6
12
14
13
Back to Top
