TM-9-2320-386-24-1-1

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2

MAY 2001

TM-9-2320-386-24-1-1 - Page 501 of 1078

TM 9-2320-386-24-1-1

0130 00

CTIS MANIFOLD POWER HARNESS REPLACEMENT (Contd)

REMOVAL

1.

Remove screw (3), lockwasher (4), and three ground (GND) leads (5) from manifold (6). Discard

lockwasher (4).

2.

Disconnect manifold power connector lead 27 (1) from manifold lead 27 (2).

3.

Disconnect manifold power connector with lead 27 and ground (GND) (8) from rear wiring

harness connector with leads 27 and ground (GND) (7).

INSTALLATION

1.

Connect manifold power connector lead 27 (1) to manifold lead 27 (2).

2.

Connect manifold power connector with leads 27 and ground (GND) (8) to rear wiring harness

connector (7) with leads 27 and ground (GND) .

3.

Install three ground (GND) leads (5) on manifold (6) with new lockwasher (4) and screw (3).

4.

Connect battery ground cable (WP 0121 00).

0130 00-2