TM-9-2320-386-24-1-1

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2

MAY 2001

TM-9-2320-386-24-1-1 - Page 809 of 1078

REMOVAL

NOTE

Have drainage container ready to catch oil.

Remove oil filter (2) from oil filter base (1). Discard oil filter (2).

INSTALLATION

1. Apply lubricating oil to seal of new oil filter (2).

2. Install oil filter (2) on oil filter base (1). Tighten oil filter (2) until it contacts oil filter base (1), then

tighten an additional 7/8 to 1 full turn.

3. Fill hydraulic oil reservoir to proper level (WP 0213 00).

1

2

0214 00-2

TM 9-2320-386-24-1-1

0214 00

FRONT WINCH HYDRAULIC OIL FILTER REPLACEMENT (Contd)

END OF WORK PACKAGE