TM-9-2320-386-24-1-1

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2

MAY 2001

TM-9-2320-386-24-1-1 - Page 922 of 1078

REMOVAL

.

WARNING

.

Do not touch hot exhaust system components with bare hands.

Injury to personnel may result.

1.

Remove cotter pin (9) and exhaust tube (10) from oil pan shroud (6). Discard cotter pin (9).

2.

Remove two cotter pins (12), elbow (13), and exhaust tube (10) from heater (14). Discard cotter

pins (12).

3.

Remove locknut (1), screw (3), clamp (2), and exhaust tube (10) from splash shield (4). Discard

locknut (1).

4.

Remove exhaust tube (10) from vehicle.

5.

Remove four screws (8), lockwashers (7), and oil pan shroud (6) from engine oil pan (5). Discard

lockwashers (7).

INSTALLATION

1.

Install oil pan shroud (6) on engine oil pan (5) with four new lockwashers (7) and screws (8).

2.

Install exhaust tube (10) on oil pan shroud (6) with new cotter pin (9).

3.

Insert exhaust tube (10) through hole (11) in toolbox (15).

4.

Install elbow (13) and exhaust tube (10) on heater (14) with two new cotter pins (12).

5.

Install exhaust tube (10) on splash shield (4) with clamp (2), screw (3), and new locknut (1).

0252 00-2

TM 9-2320-386-24-1-1

0252 00

OIL PAN SHROUD AND EXHAUST TUBE REPLACEMENT (Contd)