TM-9-2320-386-24-1-2
2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 2 OF 2
MAY 2001
TM-9-2320-386-24-1-2 - Page 328 of 636
TM 9-2320-386-24-1-2
0337 00
TRANSMISSION FLEXPLATE AND HUB REPLACEMENT (Contd)
REMOVAL
1.
Remove eight screws (7), plate (6), flexplate (5), and hub (2) from crankshaft (1).
2.
Remove hub (2) from flexplate (5).
3.
Remove twelve screws (3) and ring gear (4) from flexplate (5).
INSTALLATION
1.
Apply adhesive to twelve screws (3), and install ring gear (4) on flexplate (5) with twelve screws (3).
Tighten screws (3) 36-43 lb-ft (49-58 N
•
m) in sequence shown.
2.
Install hub (2) on flexplate (5).
3.
Install flexplate (5), hub (2), and plate (6) on crankshaft (1) with eight screws (7). Tighten screws (7)
90-100 lb-ft (125-136 N
•
m) in sequence shown.
4.
Install adapter and transmission (WP 0336 00).
0337 00-2
Back to Top
