TM-9-2320-386-24-1-2
2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 2 OF 2
MAY 2001
TM-9-2320-386-24-1-2 - Page 326 of 636
13.
Remove four guide screws (12) from adapter (13), and install four new lockwashers (14) and
screws (15) on adapter (13) and transmission (3). Tighten eleven screws (15) 36-43 lb-ft (49-58 N
•
m).
14.
Lower lifting device and remove chains and four screws (9) and (10) from transmission (3).
15.
Apply sealing compound to threads of two screws (9) and install screws (9) in transmission
housing (1).
16.
Apply adhesive to threads of six screws (23), rotate crankshaft, and install six screws (23) hand-
tight on ring gear (22) and ring (16). Rotate crankshaft and tighten screws (23) 36-43 lb-ft
(49-58 N
•
m).
17.
Apply a bead of silicone rubber adhesive around mating surface of cover (19) and install cover (19)
on flywheel housing (11) with four washers (21) and screws (20).
18.
Install engine and transmission (WP 0295 00).
LIFTING DEVICE
CHAINS
9
10
9
1
11
12
LIFTING
DEVICE
CHAINS
14
15
~
3
2
~
16
17
18
13
~
~
~
11
21
20
22
23
16
19
TM 9-2320-386-24-1-2
0336 00
TRANSMISSION (OUT OF VEHICLE) REPLACEMENT (Contd)
0336 00-5/6 blank
END OF WORK PACKAGE
Back to Top
