TM-9-2320-386-24-1-2
2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 2 OF 2
MAY 2001
TM-9-2320-386-24-1-2 - Page 464 of 636
0370 00-2
TM 9-2320-386-24-1-2
0370 00
TRANSMISSION OIL PAN AND FILTER REPLACEMENT (Contd)
REMOVAL
1.
Remove twenty-one screws (1), oil pan (2), and gasket (3) from transmission (7). Discard
gasket (3).
2.
Remove screw (4) and filter (5) from control valve (6) and intake tube (9) on transmission (7).
Discard filter (5).
3.
Remove oil intake tube (9) and seal ring (8) from transmission (7). Discard seal ring (8).
INSTALLATION
1.
Apply lubricating oil to new seal ring (8) and install seal ring (8) on oil intake tube (9).
2.
Install oil intake tube (9), with seal ring (8), on transmission (7).
3.
Apply lubricating oil to oil filter seal (10) and install new oil filter (5) on intake tube (9).
4.
Install new oil filter (5) on control valve (6) with screw (4). Tighten screw (4) 10-15 lb-ft (14-20
N
•
m).
5.
Soak new gasket (3) in lubricating oil for five minutes.
6.
Install new gasket (3) and oil pan (2) on transmission (7) with twenty-one screws (1). Tighten
screws (1) 10-15 lb-ft (14-20 N
•
m).
7.
Remove transmission from holding fixture (WP 0367 00).
Back to Top
