TM-9-2320-387-10

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

OPERATOR’S MANUAL

OCTOBER 2001

CHANGE 1

TM-9-2320-387-10 - Page 102 of 277

44

Weekly

Body

c.

Check cargo shell door

(Cont’d)

for alignment as follows:

(1) Insert a piece of paper

between the door seal and

door opening.

(2) With door closed, seal

should offer resistance to

pulling out paper. If door seal

does not offer resistance,

adjustment is required.

d.

Check crew compartment

armor for security of mounting.

e.

Check armor for loose or

missing fasteners. Notify unit

maintenance if any are found.

WARNING

Unauthorized welds and/or

drilling of vehicle armor

will degrade armor protec-

tion capabilities and could

result in severe injury to

personnel.

f.

Inspect underbody armor

f.

Vehicle missing

for missing retainer plates

retainer plates or

or screws.

screws.

g.

Inspect underbody plates

g.

Deformation is

for any deformation (buckling, visually detected.

collapsing, or bending).

h.

Check operation of C-

h.

C-partition door

partition door and ensure it

will not close and

will lock in all three positions.

lock in all three posi-

tions, or inoperative.

Table 2-2. Preventive Maintenance Checks and Services (Cont’d).

Item

No.

Interval

Not Fully Mission

Capable If:

Location

Item to

Check/

Service

Crewmember

Procedure

TM 9-2320-387-10

2-54

Change 1