51
Weekly
Tiedowns
c.
Inspect all tiedown strap
(Cont’d)
assemblies for proper operation,
frays, damage, cleanliness, and
security of mounting.
DRIVER
52
Weekly
Tow Pintle
Check pintle hook for looseness,
damaged locking mechanism,
and presence of cotter pin.
DRIVER (M1114 ONLY)
53
Weekly
Environment
a.
Check security of wind-
Control
shield de-icer control box
System
mounting.
NOTE
Insufficient cooling could
be a result of loss of R134a
refrigerant. This is a gas,
therefore leaks cannot be
detected. If leaks in lines or
fittings are suspect, the
vehicle is to be considered
non-mission capable and sent
to direct support for further
inspection(s).
b.
Check Heating, Ventilation,
b.
Leaks in lines or
and Air Conditioning (HVAC)
fittings.
vents, and mounting hardware
for damage, leaks, missing
components, and security of
mounting.
c.
Inspect exposed wiring
c.
Wiring harness
harnesses for breaks, frayed
broken, frayed, or
insulation, loose or damaged
damaged. Mounting
connectors, and loose, damaged,
hardware missing.
or missing mounting hardware.
Table 2-2. Preventive Maintenance Checks and Services (Cont’d).
Item
No.
Interval
Not Fully Mission
Capable If:
Location
Item to
Check/
Service
Crewmember
Procedure
TM 9-2320-387-10
Change 1
2-59