TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 1009 of 1205

7-8. BRAKE PRESSURE LIMITER VALVE REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Two lockwashers (Appendix G, Item 239)

Manual References

TM 9-2320-387-10

TM 9-2320-387-24P

Equipment Condition

• Hood raised and secured (TM 9-2320-387-10).

• Battery ground cables disconnected (para. 4-68).

Maintenance Level

Unit

a. Removal

CAUTION

Cover or plug all open lines and connections immediately after

disconnection to prevent contamination. Remove all covers or

plugs prior to connection.

NOTE

Have drainage container ready to catch brake fluid.

1.

Disconnect brake lines (6) and (7) from adapter fittings (8) on brake pressure limiter valves (1).

2.

Remove four adapter fittings (8) from two pressure limiter valves (1).

3.

Remove two capscrews (3), lockwashers (4), washers (5), and pressure limiter valves (1) from

bracket (2). Discard lockwashers (4).

b. Installation

1.

Install two pressure limiter valves (1) on bracket (2) with two washers (5), lockwashers (4), and

capscrews (3).

2.

Install four adapter fittings (8) on two pressure limiter valves (1).

3.

Connect brake lines (6) and (7) to adapter fittings (8) on brake pressure limiter valves (1).

TM 9-2320-387-24-1

7-28

Change 1