TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 1001 of 1205

7-7. BRAKE LINES REPLACEMENT (Cont’d)

c. Rear Caliper-to-Intermediate Brake Line Removal

TM 9-2320-387-24-1

7-20

Change 1

d. Rear Caliper-to-Intermediate Brake Line Installation

1.

Install left rear brake line (1) on intermediate brake line (3) and bracket (2) with clip (4).

2.

Install clamp (11) and brake line (1) on bracket (12) with capscrew (10).

3.

Install clamp (5) on yoke (6) with washer (8) and capscrew (9).

4.

Install washer (7.1) and caliper adapter fitting (7.2) on caliper (7).

5.

Connect left rear brake line (1) to caliper adapter fitting (7.2).

1.

Disconnect left rear brake line (1) from caliper adapter fitting (7.2).

1.1.

Remove caliper adapter fitting (7.2) and washer (7.1) from caliper (7). Discard caliper adapter

fitting (7.2).

2.

Remove capscrew (9), washer (8), and clamp (5) from yoke (6).

3.

Remove capscrew (10), clamp (11), and brake line (1) from bracket (12).

4.

Remove clip (4) and left rear brake line (1) from bracket (2) and intermediate brake line (3).

NOTE

Left side shown, right side similar.