TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 1047 of 1205

TM 9-2320-387-24-

1

8-4. RADIAL TIRE, WHEEL, AND RUBBER RUNFLAT MAINTENANCE

(Cont’d)

WARNING

Never inflate a wheel assembly with the wheel locknuts removed

in an attempt to separate inner and outer rim halves. The

assembly will separate under pressure, resulting in serious injury

or death.

3.

Remove outer rim half (1) from tire (6).

4.

Remove insert (8) and locknut (10) from outer rim (1). Discard locknut (10).

5.

Remove O-ring (9) from insert (8). Discard O-ring (9).

6.

Remove O-ring seal (3) from inner rim half (5). Cut O-ring seal (3) in two to make sure it cannot be

reused. Discard O-ring seal (3).

7.

Remove tire (6) from inner rim half (5).

8.

Remove balance weights (4) from rim halves (1) and (51, if present. Discard balance weights (4).

8-9