TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 1048 of 1205

TM 9-2320-387-24-l

8-4. RADIAL TIRE, WHEEL, AND RUBBER RUNFLAT MAINTENANCE (Cont’d)

9.

Lay tire (1) flat.

WARNING

Do not use compressor strap if it is frayed or damaged. Ensure

runflat is free of grease and runflat compressor strap is centered

around runflat. Failure to do so may cause injury to personnel.

NOTE

Perform steps 11 and 12 when using runflat compressor P/N 539250.

Perform steps 13 and 14 when using runflat compressor P/N 528236.

10.

Position runflat compressor (3) on runflat (2) so that runflat compressor hex-drive (4) is facing up

and strap (5) is centered around runflat (2).

NOTE

Compress runflat by rotating hex-drive in either direction. Rotate

hex-drive the opposite direction to loosen.

11.

Using runflat compressor (3), compress runflat (2).

12.

Position runflat compressor (6) on an outer edge of runflat (2) with handle assembly (7) facing up

and strap (8) centered around runflat (2).

NOTE

Compress runflat by rotating handle assembly in a clockwise

direction. Rotate handle assembly counterclockwise to loosen.

13.

Using runflat compressor (61, compress runflat (2).

NOTE

l

It may be necessary to use a tire spoon and tire soap to remove

runflat from tire.

l

When using runflat compressor P/N 528236, handle may need

to be removed before removing runflat.

14.

Remove runflat (2) from tire (1) and remove runflat compressor (3) or (6) from runflat

(2).

RUNFLAT COMPRESSOR (P/N 139250)

RUNFIAT COMPRESSO::

(P/N 528236)

8-10