TM-9-2320-387-24-1

TM-9-2320-387-24-1 - Page 26 of 1205

9-2320-387-24-l

1-7. METRIC SYSTEM

The equipment described herein contains metric components and requires metric common and special

tools; therefore, metric units in addition to standard units will be used throughout this publication.

In addition, a metric conversion table is located on the inside back cover of this publication.

l-8.

MANDATORY REPLACEMENT PARTS

The maintenance instructions contained herein make reference to removing and discarding piece

parts such as: gaskets, lockwashers, cotter pins, O-rings, seals, etc.; these items should be considered

mandatory replacement items and replaced with new parts during assembly/installation.

l-9.

BREAK-IN PROCEDURE

Upon receipt of vehicles, or after engine replacement, break-in procedures must be observed during the

first 500 miles (804 kilometers) of operation. For break-in procedure, refer to TM 9-2320-387-10.

Section II. EQUIPMENT DESCRIPTION AND DATA

1-l 0. EQUIPMENT CHARACTERISTICS, CAPABILITIES, AND FEATURES

The

4x4, Ml113 and Ml114 vehicles are tactical vehicles designed for use over all types of roads, as well

as cross-country terrain, in all weather conditions. The vehicles have four driving wheels powered by a

V-8, liquid-cooled, turbocharged diesel engine. Four-wheel hydraulic service brakes and a mechanical

parking brake are common to all models. Ml113 and Ml114 vehicles are equipped with a pintle hook for

towing. Tiedown and lifting eyes are provided for air, rail, or sea shipment.

1-2