TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 572 of 1205

TM

9-2320-387-24-l

1

ENGINE OIL FILLER TUBE MAINTENANCE

I

This task covers:

a. Removal

b. Inspection

c.

Installation

INITIAL SETUP:

Tools

General

mechanic’s

tool kit:

automotive

(Appendix

B, Item 1)

hIaterials/Parts

Lubricating

oil (Appendix

C, Item 44)

hIanua1

References

TM 9-2320-387-10

TM 9-2320-387-24P

Equipment Condition

Hood raised and secured

(TM 9-2320-387-102

Rlaintenance Level

Unit

1

a.

Removal

1

1.

Loosen clamp (2) and disconnect

CDR valve hose (1) from engine oil filler tube (3).

2.

Remove two nuts (41, washers

(51, and engine oil filler tube (3) from timing chain cover (7) and studs (8).

-1

Inspect grommet

(6) for breaks

or cracks. Replace if defective.

c. Installation

1.

Coat grommet

(6) with lubricating

oil.

2.

Install engine oil filler tube (3) on timing chain cover (7) and studs (8) with two washers

(5) and

nuts (4). Tighten

nuts (4) to 13-20 lb-ft (18-27 N=m).

3.

Connect CDR valve hose (1) to engine oil filler tube (3) and tighten

clamp (2).

.-

0

6

FOLLOW-ON

TASK: Lower and secure hood (TM 9-2320-387-10).

3-4