TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 647 of 1205

TM 9-2320-387-24-l

1 3-40. RIGHT FUEL INJECTION LINES BRACKET REPLACEMENT

This

task covers:

a. Removal

b. Installation

INlTlAl.

SETUP:

Tools

General mechanic’s tool kiti

automotive (Appendix B, Item 1)

Manual References

TM 9-2320-387-24P

Equipment Condition

l

Engine

access cover removed (para.

10-22).

l

Air horn removed (para. 3-14).

Maintenance Level

Unit

[

a. Removal

1

1.

Remove two screw-assembled washers (6), clamps (51, and clamp (7) from bracket (1).

2.

Inspect two clamps (5) for cracks or breaks. Replace if defective.

3.

Remove two nuts (31, washers (21, and bracket (1) from valve cover studs (4).

I

b. Installation

I

1.

2.

Install bracket (1) on two valve cover studs (4) with washers (2) and nuts (3).

13-20 lb-R (18-27 N-m).

Install two clamps (5) and clamp (7) on bracket (1) with two screw-assembled

screw-assembled washers (6) to 3-4 lb-R (4-5 Nom).

-

Tighten nuts (3) to

washers (6). Tighten

FOLLOW-ON TASKS:

l

Install air horn (para. 3-14).

l

Install engine access cover (para. 10-22).

3-79