TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 665 of 1205

TM

9-2320-387-24-l

1 3-52. REAR HEAT SHIELD REPLACEMENT

1

This task covers:

a.

Removal

b.

Installation

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

nlanual

References

TM 9-2320-387-24P

Equipment

Condition

Right rear heat shield removed (para. 3-58).

General Safety Instructions

Do not touch hot exhaust system components with

bare hands.

Maintenance

Level

Unit

WARNING

Do not touch hot exhaust system components with bare hands. Severe

injury may result.

a.

Removal

1.

Remove capscrew (7) from rear heat shield (2) and left exhaust manifold (5).

2.

Remove capscrew (1) from rear heat shield (2) and left cylinder head (6).

3.

Remove two capscrews (3) and rear heat shield (2) from turbocharger (4).

b. Installation

1.

Install rear heat shield (2) on turbocharger (4) with two capscrews (3).

2.

Install rear heat shield (2) on left cylinder head (6) with capscrew (1).

3.

Install rear heat shield (2) on left exhaust manifold (5) with capscrew (7).

FOLLOW-ON TASK: Install right rear heat shield (para. 3-58).

3-97