TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 670 of 1205

TM 9-2320-387-24-l

3-56.

RIGHT EXHAUST MANIFOLD HEAT SHIELD REPLACEMENT

This task covers:

a.

Removal

h.

Installation

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

hIaterials/P&

Three lockwashers

(Appendix G, Item 206)

hlanual

References

TM 9-2320-387-10

TM 9-2320-387-24P

Equipment

Condition

l

Hood raised and secured (TM 9-2320-387-10).

l

Right rear heat shield removed (para. 3-58).

l

Starter removed (para.

4-11).

General Safety Instructions

Do not touch hot exhaust system components with

bare hands.

hlaintenance

Level

Unit

WARNING

Do not touch hot exhaust system components

with bare hands.

Severe injury may result.

a. Removal

1.

Remove two capscrews (51, lockwashers

(61, and harness clamps (4) from right exhaust manifold

heat shield (3). Discard lockwashers

(6).

2.

Remove four capscrews (7) and right exhaust manifold heat shield (3) from exhaust manifold (2) and

cylinder head (1).

b. Installation

1.

Install right exhaust manifold heat shield (3) on exhaust manifold (2) and cylinder head (1) with

four capscrews (7).

2.

Install two harness clamps (4) on right exhaust manifold heat shield (3) with two lockwashers (6) and

capscrews (5).

3-102