TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 693 of 1205

3-70. RADIATOR INLET HOSE REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Maintenance and repair shop equipment:

automotive (Appendix B, Item 2)

Manual References

TM 9-2320-387-24P

Equipment Condition

Cooling system depressurized (para. 3-61).

Maintenance Level

Unit

1.

Loosen two clamps (2) and remove inlet hose (3) from radiator (1) and water crossover (4).

2.

Remove two clamps (2) from hose (3).

1.

Install two clamps (2) on inlet hose (3).

2.

Install hose (3) on water crossover (4) and radiator (1) and tighten two clamps (2)

to 85-95 lb-in. (10-11 N

•

m).

b. Installation

a. Removal

TM 9-2320-387-24-1

3-126

Change 1

FOLLOW-ON TASK: Tighten coolant filler cap (para. 3-61).

1

2

3

2

4