TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 696 of 1205

3-73. WATER PUMP INLET HOSE REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Manual References

TM 9-2320-387-24P

Equipment Condition

Cooling system drained (para. 3-61).

Maintenance Level

Unit

1.

Loosen two clamps (2) and remove water pump inlet hose (3) from water pump (1) and lower tube

assembly (4).

2.

Remove two clamps (2) from hose (3).

1.

Install two clamps (2) on water pump inlet hose (3).

2.

Install hose (3) on lower tube assembly (4) and water pump (1) and tighten two clamps (2) to

90-125 lb-in. (10-14 N

•

m).

b. Installation

a. Removal

TM 9-2320-387-24-1

Change 1

3-129

FOLLOW-ON TASK: Fill cooling system (para. 3-61).

1

2

3

2

4