TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 729 of 1205

4-7. 200-AMPERE DUAL VOLTAGE UMBILICAL POWER CABLE REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

1.

Remove nut (5), lockwasher (4), washer (3), and positive power cable (2) from buss bar (1).

Discard lockwasher (4).

2.

Remove capscrew (6), lockwasher (7), negative power cable (8), and two cables (9) from shunt (10).

Discard lockwasher (7).

3.

Remove five capscrews (20), two lockwashers (19), washers (18), and coverplate (17) from B-beam (12).

Discard lockwashers (19).

4.

Remove two nuts (15), washers (14), capscrews (25), washers (26), and mounting bracket (27) from

coverplate (17).

5.

Remove nut (28), screw (23), and cover (22) with cover chain (21) from mounting bracket (27).

6.

Remove cover (22) with cover chain (21) from umbilical power cable assembly (29).

7.

Remove four nuts (30), screws (24), and mounting bracket (27) from umbilical power cable assembly (29).

8.

Pull umbilical power cable assembly (29) through grommet (11) and coverplate (17), and remove

from vehicle (16).

9.

Remove grommet (11) from battery box (13).

INITIAL SETUP:

Applicable Models

M1113

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Four

lockwashers (Appendix G, Item 215)

Sealing compound (Appendix C, Item 64)

Personnel Required

One mechanic

One assistant

Manual References

TM 9-2320-387-24P

Equipment Condition

• Batteries removed (para. 4-74).

• Fixed rear door removed (para. 10-20).

Maintenance Level

Unit

TM 9-2320-387-24-1

4-14

Change 1

NOTE

Prior to removal, tag leads for installation.