TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 760 of 1205

TM 9-2320-387-24-l

i

4-16.

ELECTRICAL GAUGE

REPLACEMENT

I

This task covers:

a. Removal

INITIAL SETUP:

b. Installation

Tools

General mechanic’s

tool kit:

automotive (Appendix

B, Item 1)

Maintenance and repair shop equipment:

automotive (Appendix B, Item 21

Materials/Parts

Manual References

TM 9-2320-387-10

TM 9-2320-387-24P

Equipment Condition

Battery ground cables disconnected (para. 4-681.

Two lockwashers (Appendix G, Item 208)

Maintenance

Level

Unit

NOTE

l

Replacement procedures for all electrical gauges are basically

the same. This procedure covers the temperature gauge.

l

Prior to removal, tag all leads for installation.

-1

1.

Remove four screws (9) and washers (8) from instrument cluster (11 and instrument panel (61.

2.

Pull instrument cluster (1) away from panel (6).

3.

Disconnect leads (4) and (5) from gauge (10).

4.

Remove two

nuts (3), lockwashers (71, retaining bracket (21, and gauge (101 from instrument cluster (I).

Discard lockwashers (7).

1.

Install gauge (10) and retaining bracket (2) on instrument cluster (11 with two lockwashers (7) and

nuts (3). Tighten nuts (3) to 8 lb-in. (1 Nom).

2.

Connect leads (4) and (5) to gauge (10).

3.

Install instrument cluster (1) on panel (6) with four washers (8) and screws (9).

4-34