TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 819 of 1205

TM 9-2320-387-24-l

I

4-55. REAR COMPOSITE LIGHT LAMP REPLACEMENT

-1

This

task covers:

a.

Removal

b.

Installation

INITIAL SETUP:

Tools

%&era1 mechanic’s tool kit:

automotive (Appendix B, Item 1)

hlaterials/Parts

Packing (Appendix G, Item 296)

Adhesive (Appendix C, Item 12)

Manual References

TM 9-2320-387-10

TM 9-2320-387-24P

Equipment Condition

Battery ground cables disconnected (para. 4-681.

Maintenance Level

Unit

1 a. Removal 1

1.

Loosen six retaining screws (4) and remove composite light door (5) and packing (6) from composite

light (1). Discard packing (6).

2.

Remove lamps (21, (31, (71, and (8) from composite light (1).

3.

Clean adhesive from mating surfaces of light door (5) and composite light (1).

b.

Installation

1.

Install lamps (21, (31, (71, and (8) on composite light (1).

NOTE

To prevent moisture from entering light assembly, tighten all screws evenly.

2.

Install packing (61 and composite light door (5) on composite light (1) and tighten six screws (4).

3.

Apply a thin coat of adhesive to seam between composite light (1) and composite light door (5).

FOLLOW-ON TASKS:

l

Connect battery ground cables (para. 4-68).

l

Check rear composite light for proper operation (TM 9-2320-387-101.

4-93